What Will Influence Your Sublimation Printing Quality

There are too many factors will influence the sublimation printing quality, and some of them are controllable. For example, the heat, the pressure and the moisture. How they influence the sublimation printing? And how to control them?

In transfer printing, adjust the temperature of heat press machine can adjust the heat.Too much or too little heat are usually problematic and result in over pressing or under pressing of the substrate. Uneven heating on the press is also an issue and results in spottiness where parts of the substrate sublimate properly but other parts don’t. It is a good idea to invest in temperature strips or a thermal gun, both of which map out the temperature of the heat platen. If there are any inconsistencies or cold spots, it is best to call the manufacturer of the press.

Pressure is equally important and sometimes, uneven transfers can be resolved by simply increasing the pressure. It is possible for the press to be providing uneven pressure however and generally, the manufacturer would do a phone walk through on how to calibrate the press and provide additional assistance to resolve that problem.

If everything checks out, moisture may play a role in spotty transfers. Moisture can warp flat items and can act as a barrier between the surface and the sublimation ink trying to penetrate it. This step is not always listed on the instructions, but it is good practice to pre-press items for 5-10 seconds at high heat and light-medium pressure to let moisture escape and flatten out the substrate. For warped items, such as MDF boards, pre-pressing both sides may be necessary.